Datasheet3D live viewStencil Printers & Stencil Cleaning
Manual SMT stencil printer, 525 × 380 mm stencils
- Model
- SPR 500
- Stencil size
- 525 × 380 mm
Fig. 01 of 07Stencil Printers & Stencil Cleaning
Stencil Printing & Cleaning
Stencil cleaning machine, spray-in-air, 740 × 740 mm stencils
EPS SC-740 is an automatic stencil cleaning machine for solder-paste and adhesive stencils up to 740 × 740 mm (29″ × 29″). The stencil hangs in a vertical cabinet while a reciprocating elevator carries low-pressure spray nozzles (under 1 bar) and a hot air knife over both faces, so fine-pitch apertures are cleaned without damage and come out dry in one cycle.
- Quote response
- Within one working day
- Commissioning
- Installation and operator training
- After sales
- Service and spares from Pune
Technical specifications
| Property | Value |
|---|---|
| Brand | EPS1 |
| Model | EPS SC-7402 |
| Stencil frame size | up to 740 × 740 mm (29″ × 29″)2 |
| Cleaning | Spray-in-air, low-pressure nozzles under 1 bar; vertical elevator with adjustable stroke2 |
| Wash tank | 57 L, stainless steel; magnetically coupled centrifugal pump2 |
| Filtration | 20 micron + 5 micron, 10″ cartridges2 |
| Wash heater | 3 kW, max 60 °C2 |
| Wash cycle | 3–6 min2 |
| Drying | Hot air knife with 2 centrifugal fans, 2 × 1.5 kW heaters, max 60 °C2 |
| Drying cycle | 6–12 min2 |
| Control | 5.1″ touch screen with PLC, 99 programs, weekly timer, password, SPC fault reporting2 |
| Power supply | 400 V 3-phase + N, 50 Hz2 |
| Dimensions | 950 × 1250 × 1850 mm2 |
| Weight | 360 kg (without chemicals)2 |
| Wetted parts | Stainless steel2 |
| Cleaning phases | 3 (spray cleaning, rinsing, hot-air drying)3 |
| Nozzles | 44 nozzles at 90 mm spacing on motor-driven reciprocating arms, 110 mm/s3 |
| Frame dimension | max 740 × 740 × 40 mm (stencils up to 29″ × 29″)3 |
| Maximum power input | 7.75 kVA (415 V 3-phase, 32 A breaker)3 |
| Exhaust | 4″ port on top; 2300–3000 l/min central exhaust required3 |
| Noise | Below 70 dB3 |
| Recommended cleaning media | Zestron VIGON SC 200 / SC 202 or KYZEN E5631 aqueous cleaner; no alcohols or flammable liquids3 |
| Rinsing | Separate rinsing circuit, 5 µm filtration, 30 l/min (double-tank version)3 |
- 1 maker
- 2 SC-740 brochure
- 3 EPS manual rev 1.1 (2018)
About this machine
- Wash: 57 L stainless steel tank, magnetically coupled centrifugal pump, 20 and 5 micron 10″ filters, 3 kW heater up to 60 °C; cycle 3–6 minutes
- Dry: air knife with two centrifugal fans and 2 × 1.5 kW heaters; cycle 6–12 minutes
- 5.1″ touch-screen PLC with 99 stored cleaning programs, weekly timer, password protection and SPC fault monitoring
- All wettable parts in stainless steel; adjustable elevator stroke shortens the cycle for smaller stencils
- 400 V three-phase, 950 × 1250 × 1850 mm, 360 kg
Drive Technologies, Pune, supplies and supports EPS SMT equipment in India. Installation, cleaning-chemistry advice, operator training and spares included.
Technical documents
Pricing on request
Tell us your board size and volume. We'll spec the right configuration.
info@drivetech.in · +91 93722 49548
More Stencil Printers & Stencil Cleaning
View category →