DatasheetStencil Printers & Stencil Cleaning
Stencil cleaning machine, spray-in-air, 740 × 740 mm stencils
- Stencil frame size
- up to 740 × 740 mm (29″ × 29″)
- Cleaning phases
- 3 (spray cleaning, rinsing, hot-air drying)
Fig. 01 of 03 · live view · timings illustrativeStencil Printers & Stencil Cleaning
Stencil Printing & Cleaning
Manual SMT stencil printer, 525 × 380 mm stencils
Manual stencil printer for prototype and small-batch SMT assembly. The PCB sits on a floating table with X, Y, Z and theta adjustment, so the board is aligned to the stencil apertures by hand and printed with a squeegee; the stencil frame lifts on gas springs for smooth, repeatable up-and-down movement.
- Quote response
- Within one working day
- Commissioning
- Installation and operator training
- After sales
- Service and spares from Pune
Technical specifications
| Property | Value |
|---|---|
| Model | SPR 5001 |
| Stencil size | 525 × 380 mm1 |
| Operation | Manual; no power required1 |
| Table | Floating table with X, Y, Z and theta adjustment1 |
| Stencil frame lift | Gas-spring assisted up/down1 |
| Prints | Solder paste, SMT adhesive, heat-sink compound1 |
| Material | Stainless steel1 |
- 1 drivetech.in; listing
About this machine
- Takes stencils up to 525 × 380 mm (model SPR 500)
- Prints solder paste, SMT adhesive and heat-sink compound
- No electrical supply and no running cost; stainless steel construction
Drive Technologies, Pune, supplies SMT assembly equipment to EMS lines and prototype shops across India. Training and squeegee/stencil advice included.
Pricing on request
Tell us your board size and volume. We'll spec the right configuration.
info@drivetech.in · +91 93722 49548
More Stencil Printers & Stencil Cleaning
View category →