Fig. 01Wave Soldering Machines
Machine category · 07 listed
Wave Soldering Machines
EPS wave soldering machines from table-top to 600 mm boards, with spray fluxing and solder dross recovery.
How to choose
- 01
Board width first: 180 mm table-top, 300 mm floor-standing, or 350, 460 and 600 mm for large boards and pallets.
- 02
Single wave suits leaded through-hole work; choose the dual wave (turbulent chip wave plus laminar wave) when SMD parts sit on the solder side.
- 03
Every machine runs leaded or lead-free solder in a stainless steel pot; say which so the preheat and pot are set up for it.
- 04
Table-top for batches and prototypes; floor-standing with a titanium finger conveyor for continuous lines.
- 05
Foam fluxer is standard and the spray fluxer an upgrade; the dross recovery machine pays back on busy lines.
Fig. 023D live viewWave Soldering Machines
Fig. 033D live viewWave Soldering Machines
Wave soldering machine, 350 mm boards
- Solder pot capacity
- 90 kg single wave, 170 kg dual wave; stainless steel
- Preheat
- Dual preheaters with heat tunnel and forced-air convection: 180 °C (4.8 kW) and 220 °C (2.0 kW)
Fig. 04Wave Soldering Machines
Wave soldering machine, 460 mm boards
- Solder pot capacity
- 450 kg (1000 lb); stainless steel
- Preheat
- Dual preheaters with heat tunnel and forced-air convection: 180 °C (4.8 kW) and 220 °C (2.0 kW)
Fig. 05Wave Soldering Machines
Wave soldering machine, 600 mm boards
- Solder pot capacity
- 600 kg (1325 lb); motorised quick-change pot; stainless steel
- Preheat
- Dual preheaters with heat tunnel and forced-air convection: 180 °C (4.8 kW) and 220 °C (2.0 kW)
Fig. 06Wave Soldering Machines
Fig. 07Wave Soldering Machines
Solder dross recovery machine, 1 to 5 kg batch
- Power
- 2 kW; 230 V, 50/60 Hz
- Batch capacity
- 1–5 kg dross
Not seeing the exact model?