_img_1_1670911033.jpg?dpl=dpl_9f1Vzr9TN4tkPSu2XynmjMwsZZpE)
Fig. 01 of 02Selective Soldering & Rework
Selective Soldering & Rework
Mini-wave selective soldering and through-hole rework station
Table-top mini-wave station for selective soldering of through-hole components and for through-hole rework. A small solder fountain rises through interchangeable nozzles sized to the component; the operator places the board on the laser-guided location, presses the foot switch, and the programmed wave touches the joints from below for the set time.
- Quote response
- Within one working day
- Commissioning
- Installation and operator training
- After sales
- Service and spares from Pune
Technical specifications
| Property | Value |
|---|---|
| Models | MW-10 solder fountain; MW-10A with blow-through air nozzle; MW-UBF universal X-Y-Z board fixture1 |
| Solder pot capacity | 23 kg (50 lb)1 |
| Max solder temperature | 350 °C1 |
| Programmable | Solder temperature, wave height, wave duration1 |
| Board positioning | Laser-guided location on the table; wave started by foot switch1 |
| Board fixture (MW-UBF) | up to 280 × 420 mm1 |
| Compressed air | 4 bar (MW-10A only)1 |
| Power | 220 V AC 50/60 Hz 8 A (120 V AC version available)1 |
| Warm-up | 30–45 min1 |
| Dimensions | 406 × 660 × 432 mm1 |
| Weight | 13.5 kg empty, 36 kg with solder1 |
| Nozzles | Bayonet wave nozzles WN-10 to WN-80 (25 × 13 mm DIP to 102 × 19 mm connectors); air nozzles AN-10 to AN-80; custom up to 5 in²2 |
| Controller | Microprocessor digital controller: solder temperature, wave height, flow duration, air blow-through duration; 10 menus2 |
- 1 drivetech.in MW10 page; listing
- 2 MW-10 brochure
About this machine
- Programmable solder temperature (up to 350 °C), wave height and wave duration
- 23 kg solder pot; 30–45 minute warm-up
- MW-10A adds a blow-through air nozzle; MW-UBF fixture holds boards up to 280 × 420 mm in X, Y and Z
- 220 V AC single phase; 406 × 660 × 432 mm; 36 kg with solder
Used by EMS lines and repair shops for connectors, pin headers and odd-form parts that cannot go through the wave, and for replacing through-hole parts without a full-size wave machine. Supplied with installation and operator training by Drive Technologies, Pune.
Technical documents
Pricing on request
Tell us your board size and volume. We'll spec the right configuration.
info@drivetech.in · +91 93722 49548