DatasheetWave Soldering Machines
Fig. 01 of 02 · live view · timings illustrativeWave Soldering Machines
Through-Hole Assembly
Wave soldering machine, 350 mm boards
Wave soldering machine for through-hole PCB assembly on boards and pallets up to 350 mm (14 in) wide, supplied as the 14FS single-wave or 14FD dual-wave machine. Self-contained fluxing, preheating and solder-wave modules; 90 kg single wave, 170 kg dual wave solder pot at 4.5 kW; stainless steel foam fluxer; computer control with 10 program memory, RS232 and SPC data logging. Runs leaded or lead-free solder and VOC-free fluxes.
- Quote response
- Within one working day
- Commissioning
- Installation and operator training
- After sales
- Service and spares from Pune
Technical specifications
| Property | Value |
|---|---|
| Brand | EPS1 |
| Model | 14FS (single wave) / 14FD (dual wave)2 |
| Wave width | 350 mm (14 in)2 |
| Wave type | Single wave (14FS) or dual wave (14FD): laminar wave plus turbulent chip wave2 |
| Solder | Leaded or lead-free; VOC-free flux compatible2 |
| Solder pot capacity | 90 kg single wave, 170 kg dual wave; stainless steel2 |
| Solder pot power | 4.5 kW2 |
| Max wave height | 10 mm2 |
| Preheat | Dual preheaters with heat tunnel and forced-air convection: 180 °C (4.8 kW) and 220 °C (2.0 kW)2 |
| Max conveyor speed | 2.5 m/min (8 ft/min)2 |
| Conveyor | Titanium finger conveyor2 |
| Foam fluxer tank | 4 L (1 gal), stainless steel, slide-out with drip tray2 |
| Compressed air | 17 m³/h at 4 bar (10 CFM at 60 psi); on-board air compressor2 |
| Warm-up time | about 100 min2 |
| Control | Computer control with 10 program memory, RS232 interface, SPC online/offline data logging; wave and flux interval sensors; status light tower2 |
| Pallets | Up to 300 × 400 mm2 |
- 1 maker
- 2 EPS 14FS datasheet
About this machine
- Single wave (14FS) or dual wave (14FD) with laminar and turbulent chip waves
- Dual preheaters with heat tunnel and forced-air convection, 180 °C and 220 °C
- Titanium finger conveyor up to 2.5 m/min; on-board air compressor
- Slide-out fluxer with drip tray, solder drain, wave and flux interval sensors, status light tower
- 4 L (1 gal) foam fluxer tank; about 100 min warm-up
- Made by EPS, Pune; installed, commissioned and serviced by Drive Technologies
Pricing on request
Tell us your board size and volume. We'll spec the right configuration.
info@drivetech.in · +91 93722 49548
More Wave Soldering Machines
View category →
Datasheet3D live viewWave Soldering Machines
DatasheetWave Soldering Machines
Wave soldering machine, 460 mm boards
- Solder pot capacity
- 450 kg (1000 lb); stainless steel
- Preheat
- Dual preheaters with heat tunnel and forced-air convection: 180 °C (4.8 kW) and 220 °C (2.0 kW)
DatasheetWave Soldering Machines
Wave soldering machine, 600 mm boards
- Solder pot capacity
- 600 kg (1325 lb); motorised quick-change pot; stainless steel
- Preheat
- Dual preheaters with heat tunnel and forced-air convection: 180 °C (4.8 kW) and 220 °C (2.0 kW)